Fortune Suppliers & Industries

Adarsha Supercon 9 is a high-performance, advanced sealant and adhesive designed for industrial, commercial, and residential applications. Known for its exceptional bonding strength and durability, Adarsha Supercon 9 is ideal for a wide range of materials, including metal, glass, ceramic, wood, and plastic. It provides a strong, waterproof seal and is suitable for use in demanding environments where reliability and performance are critical.

Asian Paints Xtremoseal GP Silicone Sealant:-
Acetoxy varients- Applicable on alkaline surfaces like cement
Non-corresive-Applicable on metalic surfaces like aluminium
Universal applicability-Can use in painted wood, metal, glass & sanitary joints
Less-odour-Application & consumer friendlyWater & uv resistant-Effective waterproofing and protection
Available colours-Black, white, clear variants

Definition

Silicones are synthetic polymer containing alternate silicone and oxygen atoms as its backbone. Silicones are made from silicon (a metal obtained from silica sand) and methyl chloride (an organic compound) in a process known as the “direct process”. The Silicone sealant in the uncured state normally looks like a thick paste or cream. After curing the paste turns into an impressive rubber.

Applications

Silicone sealant are used as a form-in-place gaskets for engine & transmission applications, sealing of exterior joints, aquarium joints bonding, sealing of bath tubs, construction and glazing application, electrical potting & encapsulation, mould making, etc.

Curing Mechanism

RTV silicone systems use humidity or moisture in the air during curing and cannot be accelerated using heat (excessive heat in the curing process can be detrimental). Small amounts of by-product are also produced. The cure process will only take place if the material is open to the atmosphere and curing will be adversely affected if access to humidity is removed prior to the completion of the cure process.

Provided product types

1. One component RTV silicone sealant
2. Two component RTV silicone sealant

Packing, storing, shelf life and transport

Available packing sizes vary from 25 g to 25 kg, packed in lacquered coated aluminium tubes, HDPE cartridges and epoxy coated MS drums. Store products at room temperature (20°C to 35°C). Shelf life can vary from 4 - 12 months. They are safe to transport by road, air and sea.
Features
RTV silicone sealant
Low thermal conductivity
Low chemical reactivity
Low toxicity
Thermal stability (constancy of properties over a wide temperature range of −50 to 250 °C)
The ability to repel water and form watertight seals
High degree of elongation
Does not support microbiological growth
Resistance to oxygen, ozone, and ultraviolet (UV) light. This property has led to widespread use of silicones in the construction industry (e.g. coatings, fire protection, glazing seals) and the automotive industry (external gaskets, external trim)
Electrical insulation properties. Because silicone can be formulated to be electrically insulative or conductive, it is suitable for a wide range of electrical applications
They have high gas permeability
Excellent movement capability
Limitations
Silicone sealants cannot be painted by water base paint
Although silicones are excellent at keeping bulk liquid water out, water vapor passes relatively easily through the cured silicone rubber
Dirt pickup
Some odor, corrosion problems with acetoxy type curing system
Poor tear resistance
Swelled by non-polar solvents
Short tooling time because of skin formation
Primer required with some substrates (concrete)

Boss 270 ml silicone sealant (typically Model 396 Neutral Plus) comes in a standard cartridge, offering a high-quality, low-odor, one-part sealant with excellent adhesion to various materials like glass, metal, wood, and concrete, providing permanent flexibility, weather resistance (UV/moisture), and quick skinning time (5-10 mins) for general construction, glazing, and sealing applications, available in clear, white, black, and grey. 

Anabond 683 RTV Silicone Sealant
Silicones are synthetic polymer containing alternate silicone and oxygen atoms as its backbone. Silicones are made from silicon (a metal obtained from silica sand) and methyl chloride (an organic compound) in a process known as the “direct process”. The Silicone sealant in the uncured state normally looks like a thick paste or cream. After curing the paste turns into an impressive rubber.

Application

Silicone sealant are used as a form-in-place gaskets for engine & transmission applications, sealing of exterior joints, aquarium joints bonding, sealing of bath tubs, construction and glazing application, electrical potting & encapsulation, mould making, etc.

Curing Mechanism

RTV silicone systems use humidity or moisture in the air during curing and cannot be accelerated using heat (excessive heat in the curing process can be detrimental). Small amounts of by-product are also produced. The cure process will only take place if the material is open to the atmosphere and curing will be adversely affected if access to humidity is removed prior to the completion of the cure process.

Provided product types

1. One component RTV silicone sealant
2. Two component RTV silicone sealant

Packing, storing, shelf life and transport

Available packing sizes vary from 25 g to 25 kg, packed in lacquered coated aluminium tubes, HDPE cartridges and epoxy coated MS drums. Store products at room temperature (20°C to 35°C). Shelf life can vary from 4 - 12 months. They are safe to transport by road, air and sea.
Features

• RTV silicone sealant
• Low thermal conductivity
• Low chemical reactivity
• Low toxicity
• Thermal stability (constancy of properties over a wide temperature range of −50 to 250 °C)
• The ability to repel water and form watertight seals
• High degree of elongation
• Does not support microbiological growth
• Resistance to oxygen, ozone, and ultraviolet (UV) light. This property has led to widespread use of silicones in the construction industry (e.g. coatings, fire protection, glazing seals) and the automotive industry (external gaskets, external trim)

Electrical insulation properties. Because silicone can be formulated to be electrically insulative or conductive, it is suitable for a wide range of electrical applications
They have high gas permeability
Excellent movement capability
Limitations

• Silicone sealants cannot be painted by water base paint
• Although silicones are excellent at keeping bulk liquid water out, water vapor passes relatively easily through the cured silicone 

• Some odor, corrosion problems with acetoxy type curing system
• Poor tear resistance
• Swelled by non-polar solvents
• Short tooling time because of skin formation
• Primer required with some substrates (concrete)

 

Sealants are versatile materials designed to fill gaps, joints, and cracks in a wide range of construction, automotive, industrial, and home repair applications. They are used to prevent the passage of air, water, dust, and sound, and to improve the insulation and appearance of surfaces. Sealants come in various types, including silicone, polyurethane, acrylic, and hybrid formulations, each offering unique performance characteristics for specific needs.

"Three bond" can refer to a chemical triple bond (strong, sharing 6 electrons, like in N₂) or the Japanese company ThreeBond, a global leader in industrial adhesives, sealants (like instant glues, silicones, epoxies, and rubber-based glues), and coatings used in automotive, electronics, and medical fields. Their philosophy centers on preventing energy/fluid leaks with high-performance, often environmentally friendly, bonding solutions

Anabond 666T Max is a high-performance RTV (Room Temperature Vulcanizing) silicone sealant designed as a universal, "formed-in-place" gasket maker for demanding automotive and industrial uses, creating durable, flexible seals that resist high temperatures (up to 250°C), oils, and chemicals. Available in tubes, it cures with air moisture into a tough rubber, bonding well to metals, glass, and ceramics, ideal for engine parts like oil sumps, valve covers, and pumps, preventing leaks effectively. 

Zenith Silicone Spray is a liquid silicone-based lubricant sold in industrial-grade bottles, known for its uses in lubricating, protecting, and preventing corrosion on metal/plastic parts, stopping squeaks, and working as a mold release agent, offering multi-functional benefits like moisture displacement and weather protection in a spray format. 

The "Foam Liquid Miracle Silicone Spray" for industrial use, sold in bottles, is a versatile silicone-based product that acts as a heavy-duty lubricant, mould release agent, and protective coating for various surfaces (metal, rubber, plastic). It creates a protective, non-staining film, repels water, prevents rust, and offers anti-stick properties for machinery, reducing wear and simplifying maintenance, often in aerosol cans for easy application, despite being described as liquid/foam. 

Loctite 243 is a medium-strength threadlocker designed to prevent threaded fasteners from loosening due to vibration and shock. Ideal for use on a wide variety of metal substrates, this versatile adhesive provides reliable, long-lasting bonding for screws, nuts, and bolts, offering enhanced resistance to chemicals, oils, and solvents. Loctite 243 is specifically formulated to perform in harsh environments, making it ideal for automotive, industrial, and maintenance applications.

Birkosit Sealing Compound is a high-performance, versatile sealing material designed to provide reliable seals in a variety of industrial, automotive, and construction applications. Known for its excellent resistance to temperature extremes, water, and chemicals, Birkosit is ideal for sealing joints, gaps, and seams to prevent leakage and enhance the durability of structures and equipment.

Silicone Gun (also known as a caulking gun) is a tool designed to dispense silicone sealants, adhesives, and other thick materials efficiently. Used in construction, home improvement, automotive, and industrial applications, the silicone gun provides precise control and smooth application, making it ideal for sealing gaps, joints, and seams.

Araldite Standard is a heavyweight two-component epoxy adhesive by Pidilite engineered for superior bond strength and versatility. With exceptional 120 kg/sq.cm bond strength and 470+ kg load-bearing capacity, this pale yellow adhesive delivers waterproof, chemical, heat, and corrosion-resistant performance.